Date   

Re: Non - Member Posts #suggestion

 

If the display name is set to non-member as a default, I would like there to be some way to change that, and I’m nog sure a way exists because there’s no member page. Some of our members don’t know how to use aliases and accidentally send messages from a non-member address, but it’s still them.


On Jan 26, 2021, at 8:05 AM, Chris Jones via groups.io <chrisjones12@...> wrote:

If a group is set to allow posts by non - members any such post is placed in Pending with a badge attached to inform any passing owner or moderator that the post is from a non - member. However, that badge uses the letters NM against the standard blue background. As such, unless examined more closely, it looks very like the NMM badge so the possibility of confusion cannot be ruled out. When the post is opened for checking before release (or rejection) then the badge is expanded to read Non Member against the same colour blue background. Obviously this is rather less easy to misinterpret.

If the post passes moderation then it is not clear from either the web UI or the email sent to members that the post is from a non - member. I used my wife's email address for the test and because of the way her email is set up her correct Forename & Surname were shown as the Display Name, and the members of such a group would be unlikely to realise straight away that this was not a member.  The email sent to a group also gives no clue to the poster's non - member status, or none that I have been able to detect.

Suggestion 1: Change the background colour on the NM and Non - Member badges to something other than standard blue. Something that is more clearly a "warning" (e.g. red) might be better.

Suggestion 2: Somehow flag up the fact that any given post is from a non - member for both web UI & email reading. Perhaps use a default Display Name of Non Member or a message level #hashtag advising a non - member message.

(As an aside the NM badge is not mentioned in the Owners Manual, but I'll raise that on "docs" later.)

Chris

--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


Non - Member Posts #suggestion

Chris Jones
 

If a group is set to allow posts by non - members any such post is placed in Pending with a badge attached to inform any passing owner or moderator that the post is from a non - member. However, that badge uses the letters NM against the standard blue background. As such, unless examined more closely, it looks very like the NMM badge so the possibility of confusion cannot be ruled out. When the post is opened for checking before release (or rejection) then the badge is expanded to read Non Member against the same colour blue background. Obviously this is rather less easy to misinterpret.

If the post passes moderation then it is not clear from either the web UI or the email sent to members that the post is from a non - member. I used my wife's email address for the test and because of the way her email is set up her correct Forename & Surname were shown as the Display Name, and the members of such a group would be unlikely to realise straight away that this was not a member.  The email sent to a group also gives no clue to the poster's non - member status, or none that I have been able to detect.

Suggestion 1: Change the background colour on the NM and Non - Member badges to something other than standard blue. Something that is more clearly a "warning" (e.g. red) might be better.

Suggestion 2: Somehow flag up the fact that any given post is from a non - member for both web UI & email reading. Perhaps use a default Display Name of Non Member or a message level #hashtag advising a non - member message.

(As an aside the NM badge is not mentioned in the Owners Manual, but I'll raise that on "docs" later.)

Chris


Re: Pricing change date change #update

Duane
 

While trying to create an updated chart of the cost comparison vs features for a group, I noticed a missing situation.  I doubt that it would happen often, if ever, but should be covered.  What will happen if an Enterprise group downgrades after February 2?

Thanks,
Duane


Re: Ability to add hashtags in replies #suggestion

 

On Mon, Jan 25, 2021 at 09:32 AM, Joseph Lee wrote:
when you change subject lines, topics are split, and I believe this is also the case when hashtags are introduced by members in the middle of a topic.
No, it doesn't split if a tag is added. Even if you explicitly use the "split" function on the web to add a tag, it doesn't split. It stays the same thread/topic.
 
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


Re: #bug Bouncing members! sympatico and bell.net #bug

Niman H
 

Ok thank you. Any luck with finding a fix? 
Are any other Canadian groups having this issue?


Re: Ability to add hashtags in replies #suggestion

Christos G. Psarras
 

Hi Mark,

I'm with the majority:  Users, no, but it could probably work (with caveats) for only the mods and it may require extra work from you now and possibly later; or work (as intended) for just you and that would require less work overall.


But just curious...

>>> I could add the #done hashtag, instead of having to go to the website and editing the topic

- Construct reply as normally, but with #newhashtag also and email in.  (?? OR, instead of the normal address, email the message to (non-published) group+addhashtag@groups.... possibly ??)
- If sender not an admin, treat as now, strip #newhashtag and post, done.
- If an admin, scan the subject hashtags to see if there is a new one (or ones if recursion was used for possibly adding more than one capability)
- If one found, use that and call the code that runs when a hashtag is manually added to a topic by the admin.
- Post the message now, and done.

Is something like this what you had in mind?   It mimics an admin adding a hashtag so effect-wise, nothing changes, not any new disconnects or new side-effects; same thing if currently an admin did the topic hashtag addition by hand then turned around and send the message (with or without the new hashtag), or vice versa.

Cheers,
Christos


Re: #bug First attachment doesn't show up in new topic #bug

Joanie
 

Mark, Just verified that it's fixed. Thanks, Joanie


Re: Group Sponsorships #update

SP4149
 

Mark,,
I upgraded my 2,000 member list from Basic, two weeks ago.  Unfortunately I paid for the first year with my credit card on file and then activated
sponsorship, not knowing the level of list support I would receive, I had told my  list this would be done before the 18th.  And after the special notice
went out I started getting a lot of sponsors.  I then realized that I should have activated the sponsor feature a day before the upgrade.  AS it was I received
enough sponsors for two more years of Premium subscription.
   Within an hour of the upgrade I sent out a second notice to the list that they could donate to me using Paypal to reimburse me for the first year Premium fees.
within eight hours Paypal donations had paid for the initial upgrade and I asked Paypal donations to stop. Most donations were between $5 and $25, only two higher.
I got 17 contributions thru Paypal in eight hours and 34 thru the sponsorship function in 48 hours at which I had funds for three years and disabled the sponsorship 
function.  Several subscribers who had pledged earlier to contribute complained that the Paypal donation ended before they learned of the request.

Two lessons learned. 
First the Sponsorship function works effectively, just if you have a Basic list, turn it on BEFORE you upgrade.
Two Even though the Paypal donations were more complicated to make and did not directly add to the funds on hand, they came in faster and in larger amounts.
PAYPAL should be added to the sponsorship funds collection function.

ken clark

Jan 14   

On Thu, Jan 14, 2021 at 11:05 AM Samuel Murrayy <samuelmurray@...> wrote:
On Thu, Jan 14, 2021 at 07:22 PM, Mark Fletcher wrote:
It will not show up if you are logged out of Groups.io completely.
I tested this, and: it does show up in my test group.  However, when I click it, I'm asked to log in or sign up.

Oh, err, you're right.
 
 
What is a reason why people must be registered with Groups.io to use that button?  Why can't non-members sponsor a group?  And is there a specific reason why such people can't sponsor via e.g. PayPal?

They need an account with Groups.io to sponsor a group because the payment mechanism uses existing code that requires a Groups.io account. I don't see that as a serious impediment. If you're interested in a group, you probably have a Groups.io account anyways.
 
I haven't added Paypal because the last time I looked at Paypal, their API was a mess and it made me feel dumb because I couldn't figure it out. I think their API has changed over the last few years; I will work up the courage to look at it again at some point.
 
Mark 


Re: #bug Bouncing members! sympatico and bell.net #bug

 

On Mon, Jan 25, 2021 at 2:04 PM Niman H <nimanh2000@...> wrote:
Many many of my members are bouncing since Jan 18th. Looks like all the @sympatico and @bell.net ones. The message for the bouncing reason is:
mxmta.owm.bell.net: read tcp4 66.175.222.12:36686->184.150.200.210:25: read: connection reset by peer
or
mxmta.owm.bell.net: read tcp4 66.175.222.12:49712->184.150.200.82:25: read: connection reset by peer


I'm trying to locate a contact at Bell.net. In the meantime, please have your members contact and complain to bell.net and sympatico.ca about email from us being blocked.

Thanks,
Mark


Re: #bug First attachment doesn't show up in new topic #bug

 

On Mon, Jan 25, 2021 at 12:48 PM Christos G. Psarras <christos@...> wrote:

I suspect you may also have to similarly-tweak another part of the code in regards to attachments and S3; I was actually in the middle of writing that bug report when I read this and it clicked.

I take it you are also using calls to S3 to query and retrieve (and embed/attach) the in-line image/attachments when the Follow-Topic catch-up emailer code is invoked. 

All of a sudden*** the attached images in the FO catch-up messages, while correctly named as in the original mailing, are now nothing but a 212 to 214 byte (in my test case) gibberish-contents file. (I can attach/mail them offlist if you think it may help)


Any issue with that code would be separate and, I don't think, the result of a timing issue. Please send me all relevant details off-list (name of group, all the actions you took, link to topic, etc), and I'll investigate.

Thanks,
Mark


#bug Bouncing members! sympatico and bell.net #bug

Niman H
 

Many many of my members are bouncing since Jan 18th. Looks like all the @sympatico and @bell.net ones. The message for the bouncing reason is:
mxmta.owm.bell.net: read tcp4 66.175.222.12:36686->184.150.200.210:25: read: connection reset by peer
or
mxmta.owm.bell.net: read tcp4 66.175.222.12:49712->184.150.200.82:25: read: connection reset by peer
(what does this mean?)
Is this similar to the Gmail issue some weeks ago?
Is it happening to anyone else? We are in Canada (Toronto) if that makes a difference.
Thanks! Nancy


Re: #bug Folder Photos, "emailed photos" search function, no results ????? #bug

Alain Mionnet
 

Mark,

Did you do something because a little bit better!
A little bit because for many photos in one folder nothing is coming.
For not many by folder seems ok.
Tested on 700 photos at least  (https://groups.io/g/listeATV/photosearch?q=IMSTP12) = NG.
Also on an other group, 1000 photos,( https://groups.io/g/TekScopes/photosearch?q=img) = OK
For the search on the last group, (https://groups.io/g/TekScopes/photosearch?q=Cabot)
Cabot in the second folder, couldn't not be not find.

Thank you for your help.

Best regards

Alain

https://groups.io/g/advantestinstrument
owner


Re: Ability to add hashtags in replies #suggestion

Bruce Bowman
 

On Mon, Jan 25, 2021 at 12:25 PM, Mark Fletcher wrote:
Currently, if you change the subject in a reply, to add an additional hashtag, that hashtag is just ignored. What do you all think about changing that, so that replies to topics can add hashtags?
Hashtags are a function of the topic, not a message. Is the intent that adding a hashtag to a subject line in a reply would apply only to that one message (my preference)? Or would that automatically propagate to all the other messages in the topic?

If the former, wouldn't that create a discrepancy between the emailed messages and what appears in the message archive? If the latter, what are the effects on the properties of messages previously posted in that topic (such as reply-to options, moderation, topic duration, and so on)?

To mix a metaphor, I'm having a hard time wrapping my head around this can of worms. Right now it just seems like asking for a slew of unintended, new "features." I have seen people reply to threads that are years old; and I can just see someone deciding to retroactively add a hashtag -- perhaps years from now -- with the wrong Topic Duration, causing large portions of the message archive to disappear.

Regards,
Bruce


Re: #bug First attachment doesn't show up in new topic #bug

Christos G. Psarras
 

Mark,

All of a sudden*** the attached images in the FO catch-up messages
Just to clarify, I did not test it with FO catch-up messages with embedded images, only "real" attachments, but I suspect the same problem will happen with embedded images too, since you're kinda treating them as attachments as far as storage/pointers is concerned.

Seems S3 is not returning the actual file data in time or something, only the filename does.

Cheers,
Christos


Re: #bug First attachment doesn't show up in new topic #bug

Christos G. Psarras
 

Mark,

This should be fixed now. It was a timing issue. We upload the attachments to S3 and then query S3 for a list of attachments. But S3 hadn't finished whatever it needs to do. I've added a delay.
I suspect you may also have to similarly-tweak another part of the code in regards to attachments and S3; I was actually in the middle of writing that bug report when I read this and it clicked.

I take it you are also using calls to S3 to query and retrieve (and embed/attach) the in-line image/attachments when the Follow-Topic catch-up emailer code is invoked. 

All of a sudden*** the attached images in the FO catch-up messages, while correctly named as in the original mailing, are now nothing but a 212 to 214 byte (in my test case) gibberish-contents file. (I can attach/mail them offlist if you think it may help)

Cheers,
Christos

*** or at least I just noticed it while testing for another bug I also just found, in that same FO catch-up mailer area (to be submitted soon)


moderated Re: #bug event times in /feed are all 8 hours out #bug

Malcolm Austen
 

Just an aside on a completely different issue ... (to raise in GM<F perhaps)

The left column of my pasted table of browser and OS details was black text on white in my sent folder and in my inbox when it came back from GIO ... but in the web interface that left column is displayed white text on white!

Malcolm.


Re: #bug First attachment doesn't show up in new topic #bug

 

On Sat, Jan 23, 2021 at 9:59 AM Joanie <joanie.m.nightingale@...> wrote:
start a new topic. Press the paper clip (attachment). browse for the file on your laptop and select one. I've tried jpg and pdf file types. Then Add the attachment to the topic. The file information is not displayed below the text box for the message. If you do this operation twice then the file is displayed below the text box but when send the message you'll that both attachments are in the topic.

This should be fixed now. It was a timing issue. We upload the attachments to S3 and then query S3 for a list of attachments. But S3 hadn't finished whatever it needs to do. I've added a delay.

Thanks,
Mark 


moderated Re: #bug event times in /feed are all 8 hours out #bug

Malcolm Austen
 

Hmm, the left column of the table went missing en-route to GIO, here it is, with <Ctrl-Shft-V>

Vivaldi 3.5.2115.87 (Stable channel) (64-bit)
Revision 63862004ac4fa761fcf3c744cd6ac9ef44284b9c
OS Windows 10 OS Version 1909 (Build 18363.1316)
JavaScript V8 8.7.220.31
Flash (Disabled)
User Agent Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.142 Safari/537.36


moderated Re: #bug event times in /feed are all 8 hours out #bug

Duane
 

On Mon, Jan 25, 2021 at 11:54 AM, Mark Fletcher wrote:
What browser and operating system are you using?
On mine, it's Win7 Home Premium with FF 84.0.2, both 64 bit, everything set to CST.  I thought this problem might have something to do with my ISP, so I took my laptop to town and connected on another service - no help.  I don't use the Feed much, so not a major concern here, just curiosity now.  I've almost decided it may just be one of the joys of living in the boonies. ;>)

Duane


Re: Include info blurb & link to the upon account creation #suggestion

Christos G. Psarras
 

That looks good, unobtrusive, simple, and precise, thanks!

Cheers,
Christos


On 2021-01-25 10:27, Mark Fletcher via groups.io wrote:
I've added links to the help center to the following areas:

21 - 40 of 27950