Date   

moderated Re: Is there any way I can determine if the Yahoo invitation has been received

Judy F.
 

Thanks Mark, I guess I’m thinking the same thing.  I paid the fee because I have the receipt where it has been paid and then I clicked the Easy Yahoo Group Transfer and proceeded.  Here’s what I figured out. 

1) when asked for the group email address, I thought that meant mine instead of the actual sewwhatembroiderysoftware  yes, I know it said ‘group’, but my email is also my group email address. 

 

I have now fixed that and clicked the Update Transfer.  I see a note where the invite has been received and will accept it soon. 

 

Sorry to cause this problem, but I’m glad I contacted you since I would still be waiting.  I really appreciate you help on this.  Please let me know if there is still something that is causing a problem. 

 

Judy F.

Sew What Embroidery Software IO

SW Florida - USA

 


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

Duane
 

On Thu, Oct 24, 2019 at 10:59 AM, William Ellis wrote:
Group.IO does display only the . when a message is in the group
The group should display a portion of the persons email address if they haven't set a Display Name at all.  The only place I can see anything else on my groups is when the person has left the group and their name is replaced with 3 periods ...

Duane


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

On Thu, Oct 24, 2019 at 08:59 AM, Tanya's Feline CKD wrote:
Looks like it's also a feature you might be able to use too,
Possibly. What I personally have been requesting for quite awhile (and there was a whole discussion about this at one point) is putting the Display Name under control of the group moderators/owners, so that they can't go and change it back to something else from our required format. But the issue is complex, because things happen to the Display Name when the person changes their overall groups.io User Name. Or used to. That causes, or used to cause, a change in the Display Name for all their groups as well. I haven't kept track of how this heirarchy has evolved over time. 
 
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

On Thu, Oct 24, 2019 at 09:02 AM, Michael Pavan wrote:
the intention(s) of anyone else
No intentions at all here, simply pointing out how the feature currently works. It does take the name from any email sent if there is one, which is generally sufficient for its *intended* purpose (i.e., displaying with the member's sent messages). Of course if people have other uses for it that necessitates a change in the feature, why would anyone object. I certainly have no issue.
 
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

Michael Pavan
 

The Display Name is an identifier of who the email belongs to, a sorting reference for the Members list, as well as of who sent a message.
Perhaps others value it in more ways...

Why should its value for all be limited by the intention(s) of anyone else???

On Oct 24, 2019, at 11:36 AM, J_Catlady <j.olivia.catlady@gmail.com> wrote:

It is actually an issue for me in a different way, because our group requires a certain form for the Display Name. So we end up setting everyone’s Display Name by hand anyway.

I’m talking in general. The purpose of the Display Name is that it be displayed with the member’s messages. If there are no messages by the member, then by definition, it need not be displayed and is unnecessary assuming that intended purpose. If you’re using it for a different purpose, like looking through your Members list, that’s another issue.
On Oct 24, 2019, at 8:27 AM, Tanya's Feline CKD <helen@felineckd.com> wrote:

Just because it's not a problem for you doesn't mean it's not a problem for others. I hate seeing a massive list of blank names in my membership lists, and more to the point, it's kind of hard for my Condolence Mods to do a condolence post when they don't have a name to whom they can offer condolences. There is plenty groups.io could do, namely require anybody signing up to provide a display name, it's not that much of a requirement, but one I've been asking for unsuccessfully for ages.



moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

Looks like it's also a feature you might be able to use too, though no guarantee the form you require the name in would be the default.


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

After Duane's comment about "well configured email systems" I went back to the W3 spec, and checked to see if "." was an acceptable email alias.  The spec says that an Alias should have 2 or more characters, or the email system should display only the email address.  So, the "." is more than 2 characters, so it meets the spec.  I am sure that the board in 2001 never thought that someone would use " as a character.  Since email is dead as a standard, I am guessing that there will not be another revision to the standard in our lifetime.

what I did not realize is that Group.IO does display only the . when a message is in the group.  This is clearly a bug.  So what ever property is used to create the group posting (in this case the web interface) is the issue not the email.


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

It is actually an issue for me in a different way, because our group requires a certain form for the Display Name. So we end up setting everyone’s Display Name by hand anyway.

I’m talking in general. The purpose of the Display Name is that it be displayed with the member’s messages. If there are no messages by the member, then by definition, it need not be displayed and is unnecessary assuming that intended purpose. If you’re using it for a different purpose, like looking through your Members list, that’s another issue.

On Oct 24, 2019, at 8:27 AM, Tanya's Feline CKD <helen@felineckd.com> wrote:

Just because it's not a problem for you doesn't mean it's not a problem for others. I hate seeing a massive list of blank names in my membership lists, and more to the point, it's kind of hard for my Condolence Mods to do a condolence post when they don't have a name to whom they can offer condolences. There is plenty groups.io could do, namely require anybody signing up to provide a display name, it's not that much of a requirement, but one I've been asking for unsuccessfully for ages.


--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: 2 questions about the Yahoo Group transfer

Harm Selling <h.selling@...>
 

Yesterday  there were 70 groups ahead in the queue, this morning (Dutch time) 75 and now 79.

This is very frustrating and seems to be an endless waiting time :-(


---

Harm Selling



----- Original Message -----
From: Mark Fletcher [mailto:markf@corp.groups.io]
To: main@beta.groups.io
Sent: Wed, 23 Oct 2019 13:50:38 -0700
Subject: Re: [beta] 2 questions about the Yahoo Group transfer

On Wed, Oct 23, 2019 at 12:29 PM Harm Selling <h.selling@...> wrote:


1. Last Friday (5 days ago) I requested a transfer for my Yahoo group.Last Saturday (4 days ago) I've given the go-ahead.
How long is the actual waiting time for finishing the transfer?

I've added a status line to the transfer page. When you go to edit your transfer, if it's been submitted for transfer, you'll now see one of these 4 status lines:
 
Your group is awaiting export from Yahoo. [Step 1 of 4]
Your group is being exported from Yahoo right now. [Step 2 of 4]
Your group is awaiting import into Groups.io. There are about N groups ahead of it in the queue. [Step 3 of 4]
Your group is being imported into Groups.io right now. [Step 4 of 4]

Where N in Step 3 is an estimate as to where you are in the queue. Your group is about 70th in the queue right now.
 
Step 4 is the biggest bottleneck, as I can only import so many groups at a time without overloading the system. I can't give an estimate as to how long each group takes to be imported, because each group is different (how many photos, how many messages, etc). Also it's dependent on how many groups have requested expedited processing at the time.
 
 

2. The member list of my group has a lot of members with the status "No mail". I'm afraid most of these members are not active anymore. Do these members receive a welcome message by joining Group.io? And if that message bounces, are these bouncing accounts automaticly removed or do they automaticly get the status "bouncing"?
If not…. What's the best way to check and clean up these "no mail" accounts? My group contains no-mail accounts from the year 2000, the year of introducing the group, 19 years ago.

 

If you didn't uncheck the 'Send a message to your members when the transfer is complete' they will be sent a welcome message (ditto if you have a group welcome message). That will be tracked for bouncing. Whether that actually triggers someone being removed depends on the type of bounce back received.
 
Thanks,
Mark 


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

Just because it's not a problem for you doesn't mean it's not a problem for others. I hate seeing a massive list of blank names in my membership lists, and more to the point, it's kind of hard for my Condolence Mods to do a condolence post when they don't have a name to whom they can offer condolences. There is plenty groups.io could do, namely require anybody signing up to provide a display name, it's not that much of a requirement, but one I've been asking for unsuccessfully for ages.


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

On Thu, Oct 24, 2019 at 07:11 AM, Duane wrote:
Only if there is one obviously.  And then only after they've sent a message.
Both absolutely true. But if they don't send a message, there's no problem with their having no Display Name. And most people do have a name attached to their email. And if they don't, there's basically not much the groups.io system can do about it. It's still incumbent on the group owner to set one up in those (rare) cases.
 
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

Duane
 

On Thu, Oct 24, 2019 at 08:37 AM, J_Catlady wrote:
groups.io automatically harvests a Display Name from the person's email if you don't set one up
Only if there is one obviously.  And then only after they've sent a message.

Duane


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

On Thu, Oct 24, 2019 at 05:59 AM, Tanya's Feline CKD wrote:
I want a visible name for anybody in my groups, but I have to add a name myself for 95% of my applicants.
But groups.io automatically harvests a Display Name from the person's email if you don't set one up. 
 
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

No, it belongs here. I know Mark has his hands full right now, but a name is a feature request I've been asking for for years. I want a visible name for anybody in my groups, but I have to add a name myself for 95% of my applicants. Personally I'd rather have providing a name compulsory, I don't care what it is, they can make it up, but I want to see a name. The group I'm helping set up now has the majority of users with no name, and since I didn't moderate it before, I have no idea what to call these people.

Helen


moderated Re: Is there any way I can determine if the Yahoo invitation has been received

 

On Wed, Oct 23, 2019 at 8:30 PM J. Faulkner <jfaulkner44@...> wrote:
As a note, I sent a note to Shal's help group, but don't see it listed.  So here goes
I started the transfer process on October 21, paid my money and followed the steps.  I then did the invitation in my Yahoo Group using the transfer@groups.io .  Yesterday, I did another one just in case.  As of this date, I haven't received anything from Yahoo stating that you are a member so I can make you Moderator.  Is there any way to check to see if that invite was received?  I followed the instructions step by step.  Is there a backlog of accepting these invitations? 


You can look up your transfer request, and if we've received your invite, it should tell you so.

 
The name of my groups.io group is sewwhatembroiderysoftware and the name is the same for the Yahoo Group.  Please contact me if there is any other information you might need or give me instructions on how to check this.

I looked up your group and there is no transfer request associated with that group. Which explains why we haven't received an invite (I filter all incoming messages to transfer@groups.io and only allow in invites from groups we have transfer requests from).

The question is, why doesn't that group have a transfer request associated with it? Did you set one up and then something happened to it? Is there something I can make more clear about the process?

I think I'll add something to the sticky wiki about this.

Thanks,
Mark


moderated Is there any way I can determine if the Yahoo invitation has been received

Judy F.
 

As a note, I sent a note to Shal's help group, but don't see it listed.  So here goes
I started the transfer process on October 21, paid my money and followed the steps.  I then did the invitation in my Yahoo Group using the transfer@groups.io .  Yesterday, I did another one just in case.  As of this date, I haven't received anything from Yahoo stating that you are a member so I can make you Moderator.  Is there any way to check to see if that invite was received?  I followed the instructions step by step.  Is there a backlog of accepting these invitations? 

The name of my groups.io group is sewwhatembroiderysoftware and the name is the same for the Yahoo Group.  Please contact me if there is any other information you might need or give me instructions on how to check this.

Believe me I know you have an influx of transfers and I'm not trying to rush, just want to make sure that my invitation is there or somewhere. 

Thank you,
Judy Faulkner
SW Florida - USA


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

 

Belongs in GMF group again.
--
J

Messages are the sole opinion of the author, especially the fishy ones.
My humanity is bound up in yours, for we can only be human together. - Desmond Tutu


moderated Re: Blank names when users join or get imported translates into postings getting rejected from mail

Anita L
 

The owner or mod can enter a name and click save. I always add a name once someone joins.
 
Anita


moderated Re: Migrate Groups to Subgroups

Duane
 

It looks to me like you didn't read the message at the top of the Messages page (in the gray box.)

Duane


moderated Re: Migrate Groups to Subgroups

 

On Wed, Oct 23, 2019 at 5:18 PM Simon Hedges <simhedges@...> wrote:
I manage a number of semi-moribund groups on Yahoogroups. There's not much traffic any more, the groups are all about the same general topic.  We don't want to lose our archives.
Is it possible to create a single master groups, with a subgroup for each of the Yahoogroups, and the ability to migrate to a specified sub-group from each Yahoogroup group?
_._,_._,_
Yes you can do this.

Cheers,
Mark 

7661 - 7680 of 30101